top of page
Search

How to Set Up TTLock in 10 Minutes: A Step-by-Step Guide for Beginners

A no-stress walkthrough for new users—get your smart lock working today!


Controlling your door lock with just one tap—sounds cool, right? It’s actually one of the most essential features everyone uses after installing a smart lock. In our previous article, we talked about how smart locks can make daily life more convenient and secure. Now, it's time to see just how quick and easy it is to get started.


The truth is, it’s not complicated at all. All you need is your smartphone and a fully installed smart lock. A few simple steps, and you’re good to go. No need to be an engineer, no digging through thick manuals, and definitely no tech-induced stress.


This guide is designed especially for beginners. Whether you’re a parent, a homeowner, or a first-time user who isn’t super tech-savvy, just follow along—and in under 10 minutes, your lock will be up and running. It’s time to experience smarter, safer living for yourself.



🔧 What You’ll Need:

  • A smartphone (iOS or Android)

  • Bluetooth turned ON

  • Internet connection (for account setup)

  • Your smart lock installed (make sure the batteries are in!)



📲 Step-by-Step TTLock Setup


Step 1: Download the TTLock App



  1. Open the App Store or Google Play

  2. Search for TTLock

  3. Tap Install and wait a few seconds



Step 2: Create an Account


TTLock setup screen
TTLock setup screen

  1. Open the app and tap Register

  2. You can register using your phone number or email

  3. Make sure to select your country/region correctly—this affects connectivity and sharing

  4. Set a strong password

  5. Check your email (or phone) for a confirmation link or verification code to activate your account


💡Quick Tip: 

If someone sends you an eKey and you’re not registered yet, TTLock will auto-create an account for you and send login details by SMS.



Step 3: Turn on Bluetooth and Location


Bluetooth & Location settings – make sure both are enabled before setup.
Bluetooth & Location settings – make sure both are enabled before setup.

  1. Open your phone’s Settings

  2. Make sure both Bluetooth and Location/GPS are switched ON



💡 Quick Tip:

Instead of opening your full Settings app, you can usually swipe down from the top of your screen to access the Quick Settings panel.

There, you can quickly switch on Bluetooth and Location with just a tap—no digging required.


💡 Why this matters:

TTLock uses Bluetooth to pair with your lock and Location Services to detect it securely. Without both, the app won’t find your lock—even if you’re standing right next to it.



Step 4: Add Your Lock



  1. pen the TTLock app

  2. On the home screen, tap the “≡” menu button (top left), then tap “Add Lock”

  3. The app will search for nearby locks using Bluetooth

  4. Wake up the lock by touching the keypad or swiping a card

  5. Your lock should appear in the Nearby Locks list—tap the “+” button to connect

  6. Once added, it will show up on your home screen with its name and battery level


⚠️ Notice:

If the lock was previously added by someone else, it won’t enter setup mode. You’ll need to reset the lock first, then try again.


💡 Troubleshooting Tip: 

If the lock doesn’t show up, check the batteries, move closer, and make sure Bluetooth and Location are still on.



Step 5: Name Your Lock


  1. After adding your lock, you’ll be prompted to name it

  2. Use something easy to remember—like “Front Door” or “Rental Unit A”

  3. Tap OK or Save


💡 A clear name helps you quickly identify each lock, especially if you add more in the future.



🛠 Common Setup Issues & How to Fix Them

Even the best apps can be picky sometimes. If something isn’t working during setup, try these quick fixes:


❌ Lock not showing up when scanning?

  • Make sure you're standing close to the lock

  • Double-check Bluetooth and Location are turned ON

  • Restart your phone or remove/reinsert the lock’s batteries


❌ “Lock already added” error?

  • The lock might already be paired with another device

  • Try requesting an admin transfer, or reset the lock manually (check your lock’s manual for instructions)


❌ Didn’t get the confirmation email?

  • Check your spam/junk folder

  • Still nothing? Try registering again using a Gmail or other well-known provider


💡 A clear name helps you quickly identify each lock, especially if you add more in the future.



✨Bonus: How to Rename Your Lock in TTLock



Follow along or read the steps below 👇

  1. Open the TTLock app and go to the home screen where your locks are listed.

  2. Tap on the lock you want to rename—this opens its detail page.

  3. Tap the “Settings” (⚙️) icon or the three dots in the top right corner.

  4. Select “Basics” or “Lock Name” (depending on your app version).

  5. Delete the current name and type in your new one (e.g., “Front Door”, “Rental Unit B”).

  6. Tap Save or OK to confirm.


Your new lock name will now appear in your lock list—making it much easier to manage.


💡 Why It Matters

Custom names make it crystal clear which lock you’re controlling—especially if you manage multiple properties or doors.It prevents confusion down the line—no more wondering if “Lock_01” is your front door or the garden shed!



✅ You’re Done!

Your lock is now connected and ready to go. You can lock and unlock it via your phone, check battery levels, and prepare to set up different access options.

Next up: Learn how to grant access to others using eKeys, passcodes, cards, fingerprints, and more in our follow-up guide:👉 Setting Up Access Permissions in TTLock (Coming Soon)



💬 Need Help?

We’ve got your back!

📩 Email us: dc@bearandme.ie

📞 Call or message: 089-964-6804

🔗 Explore our smart locks: www.bearandme.ie


Let’s make your home smarter, together. 🏡✨


 
 
 

Comentarios

bottom of page